International Coffee Hour & Crafting: Fall Foliage Lanterns!
2025-11-06 19:30 - 20:30 UTC | McKeldin Library Steps (facing McKeldin Mall)
Thurs. 11/06: International Coffee Hour & Crafting, 2:30 p.m. – 3:30 p.m.: Make Fall Foliage Lanterns to light up your walk or ride in these spooky times. Enjoy complimentary coffee, snacks, and autumn crafts with an international twist! Co-hosted by the DOTS Sustainability Team and International Student and Scholar Services (ISSS). RSVPs are encouraged but not required. See you there!
Hosted by: International Student and Scholar Services (ISSS), Transportation Services (DOTS)
Additional Information can be found at: https://terplink.umd.edu/event/11711714

IES: Intro to Basic Electronics Workshop
2025-11-06 22:00 - 23:30 | A. James Clark Hall | Leidos Lab bay #1106
Join Terrapin Works for Intro to Basic Electronics from 5:00 to 6:30 pm!

Learn the fundamentals of electronic prototyping in this beginner-friendly, hands-on workshop. You’ll create simple circuits, work with essential components, and measure key characteristics like voltage, current, and resistance.

ATTENDEES ARE ENCOURAGED TO BRING THEIR OWN LAPTOP, and a mouse is helpful!

SEATS ARE LIMITED, register early!
Hosted by: Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11835292

Singh Sandbox Series - Intro to Arduino Workshop
2025-11-07 19:30 - 21:00 | 1231 Brendan Iribe Center for Computer Science & Engineering
Join Sandbox, a UMD makerspace in the Iribe Center, for Intro to Arduino Workshop on Friday, November 7 from 2:30pm – 4:00pm!

Learn the fundamentals of wiring and programming with Arduino using Tinkercad in this hands-on, beginner-friendly workshop. You’ll practice building circuits and programming them step by step.

ATTENDEES ARE ENCOURAGED TO BRING THEIR OWN LAPTOP, and a mouse is helpful!

Create a free Tinkercad account before the workshop!

SEATS ARE LIMITED, register early!

In partnership with Terrapin Works
Hosted by: Singh Sandbox Makerspace, Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11821025

WIE - Intro to Arduino Workshop
2025-11-10 22:00 - 23:30 | E.A. Fernandez IDEA Factory | Rapid Prototyping Center, 1st Floor Room #1107
Join the Women in Engineering (WIE) Program at UMD, which supports and empowers women pursuing engineering. WIE offers resources, workshops, and opportunities to help students thrive in STEM.

Learn the fundamentals of wiring and programming with Arduino using Tinkercad in this hands-on, beginner-friendly workshop. You’ll practice building circuits and programming them step by step.

ATTENDEES ARE ENCOURAGED TO BRING THEIR OWN LAPTOP, and a mouse is helpful!

!! Create a free Tinkercad account before the workshop

SEATS ARE LIMITED, register early!

In partnership with Terrapin Works
Hosted by: Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11823409

WIE - Intro to Arduino Workshop
2025-11-11 22:00 - 23:30 | E.A. Fernandez IDEA Factory | Rapid Prototyping Center, 1st Floor Room #1107
Join the Women in Engineering (WIE) Program at UMD, which supports and empowers women pursuing engineering. WIE offers resources, workshops, and opportunities to help students thrive in STEM.

Learn the fundamentals of wiring and programming with Arduino using Tinkercad in this hands-on, beginner-friendly workshop. You’ll practice building circuits and programming them step by step.

ATTENDEES ARE ENCOURAGED TO BRING THEIR OWN LAPTOP, and a mouse is helpful!

!! Create a free Tinkercad account before the workshop

SEATS ARE LIMITED, register early!

In partnership with Terrapin Works
Hosted by: Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11823410

Intro to Woodworking: Chopsticks Workshop
2025-11-12 23:00 - 23:30 | J.M. Patterson building ROOM #1212
Join Terrapin Works for Intro to Woodworking: Chopsticks Workshop!

In this guided session, you’ll shape, sand, and finish your own pair of chopsticks while learning simple techniques for smooth, comfortable results. Walk away with a handmade set to show off at dinner!

NOTE: Please have your TerpLink confirmation ready to show when you arrive for check-in!

SEATS ARE LIMITED, register early!
Hosted by: Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11837620

Intro to Woodworking: Chopsticks Workshop
2025-11-12 23:30 - 2025-11-13 00:00 | J.M. Patterson building ROOM #1212
Join Terrapin Works for Intro to Woodworking: Chopsticks Workshop!

In this guided session, you’ll shape, sand, and finish your own pair of chopsticks while learning simple techniques for smooth, comfortable results. Walk away with a handmade set to show off at dinner!

NOTE: Please have your TerpLink confirmation ready to show when you arrive for check-in!

SEATS ARE LIMITED, register early!
Hosted by: Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11837621

Singh Sandbox Series - Intro to 3D Printing Workshop
2025-11-13 18:30 - 20:00 | 1231 Brendan Iribe Center for Computer Science & Engineering
Join Sandbox, a UMD makerspace in the Iribe Center, for Intro to 3D Printing Workshop on Thursday, November 13 from 1:30pm – 3:00pm!

Learn the basics of FDM 3D printing by creating your own Testudo shell STL file and receive a pre-printed version to take home. You will also tour our labs and see demo prints from both additive and subtractive manufacturing.

ATTENDEES ARE ENCOURAGED TO BRING THEIR OWN LAPTOP, and a mouse is helpful!

SEATS ARE LIMITED, register early!

In partnership with Terrapin Works
Hosted by: Singh Sandbox Makerspace, Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11823765

IES: Intro to Sensors Workshop
2025-11-13 22:00 - 23:30 | E.A. Fernandez IDEA Factory | Rapid Prototyping Center, 1st Floor Room #1107
Join Terrapin Works for Intro to Sensors from 5:00 to 6:30 pm!

Learn the fundamentals of working with sensors and Arduino in this beginner-friendly workshop.

You’ll connect, program, and read data from both analog and digital sensors while also exploring how breakout boards work. Gain hands-on experience reading sensor data and interacting with the Arduino environment.

ATTENDEES ARE ENCOURAGED TO BRING THEIR OWN LAPTOP, and a mouse is helpful!
SEATS ARE LIMITED, register early!
Hosted by: Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11837774

WIE - Intro to 3D Printing Workshop
2025-11-17 22:00 - 23:30 | A. James Clark Hall | Leidos Lab bay #1106
Join the Women in Engineering (WIE) Program at UMD, which supports and empowers women pursuing engineering. WIE offers resources, workshops, and opportunities to help students thrive in STEM.

Learn the basics of FDM 3D printing by creating your own Testudo shell STL file and receive a pre-printed version to take home.

You will also tour our labs and see demo prints from both additive and subtractive manufacturing.

ATTENDEES ARE ENCOURAGED TO BRING THEIR OWN LAPTOP, and a mouse is helpful!

SEATS ARE LIMITED, register early!

In partnership with Terrapin Works
Hosted by: Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11840995

The Movement Street Mixer
2025-11-17 23:00 - 2025-11-18 02:00 | Cole Student Activities Building (Vista Lounge (RM 1115)
The Movement Street Mixer is a community engagement and creative social event hosted by The Movement Street (TMS), a student-led organization bringing together students and staff for an evening of card-making, conversation, and connection.
Hosted by: The Movement Street – University of Maryland Chapter
Additional Information can be found at: https://terplink.umd.edu/event/11850741

Boredom Buster Card Making
2025-11-18 22:00 - 23:00 | AV Williams 1146
Join us in the SHPExLPHS collaboration and make personalized cards for Children’s National Hospital.
Hosted by: Latinx Pre-Health Society
Additional Information can be found at: https://terplink.umd.edu/event/11875339

WIE - Intro to 3D Printing Workshop
2025-11-18 22:00 - 23:30 | A. James Clark Hall | Leidos Lab bay #1106
Join the Women in Engineering (WIE) Program at UMD, which supports and empowers women pursuing engineering. WIE offers resources, workshops, and opportunities to help students thrive in STEM.

Learn the basics of FDM 3D printing by creating your own Testudo shell STL file and receive a pre-printed version to take home.

You will also tour our labs and see demo prints from both additive and subtractive manufacturing.

ATTENDEES ARE ENCOURAGED TO BRING THEIR OWN LAPTOP, and a mouse is helpful!

SEATS ARE LIMITED, register early!

In partnership with Terrapin Works
Hosted by: Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11840996

3D Printing for Cosplay: A Maker’s Guide To Costume Details
2025-11-18 22:30 - 2025-11-19 00:00 | John and Stella Graves Makerspace
Join us at the JSG Makerspace for a hands-on workshop dedicated to elevating your cosplay costume using 3D printing technology. In this session, you will learn how to create and find designs, slice, and print intricate costume accessories and details with our Bambu printers.
What you’ll experience:
The Fundamentals of 3D Modeling for Cosplay Wearables
Mastering the Bambu 3D Printer
Tool time: Safely explore makerspace equipment that will aid you in your cosplay
Material magic: Get hands-on experience with glue guns, paint colors, costume cut-outs, foams, fabrics, wood, vinyl, etc.
Technique: Master fundamental techniques such as cosplay costume fitting for masks, usage of foam and styrofoam for cosplay costumes, incorporating 3D printing accessories.
Community connections: Meet fellow enthusiasts, share ideas, & build your cosplay network.
We will provide 3D printing tools but your costume’s accessories, detail ideas, and other materials are up to you!
RSVP for this event on the Libraries Calendar.
Hosted by: John and Stella Graves Makerspace
Additional Information can be found at: https://terplink.umd.edu/event/11584945

Transfer Meetup: Fuse Beads
2025-11-19 19:00 - 20:00 | STAMP Juan Jimenez Room
Feeling crafty? Come take a break with TOCSL and piece together your own fuse bead creation! Supplies provided.
Hosted by: Transfer and Off-Campus Student life
Additional Information can be found at: https://terplink.umd.edu/event/11835393

Laser Cutting Workshop: Metal Business Cards
2025-11-19 22:00 - 23:30 | E.A. Fernandez IDEA Factory | Rapid Prototyping Center, 1st Floor Room #1107
Join Terrapin Works for our Laser Cutting Workshop: Metal Business Cards from 5:00 to 6:30 pm!

In this hands-on session, you’ll learn the basics of laser engraving for metal cards and get the chance to customize your own professional business card. Add your name, major, and even a QR code that links to your resume or LinkedIn to make a strong impression at career fairs.

Walk away with both new skills and a custom business card you can share with recruiters.

SEATS ARE LIMITED — register early!
Hosted by: Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11845144

WIE - Intro to Woodworking: Chopsticks Workshop
2025-11-19 23:00 - 23:30 | J.M. Patterson building ROOM #1210
Join the Women in Engineering (WIE) Program at UMD, which supports and empowers women pursuing engineering. WIE offers resources, workshops, and opportunities to help students thrive in STEM.

In this guided session, you’ll shape, sand, and finish your own pair of chopsticks while learning simple techniques for smooth, comfortable results. Walk away with a handmade set to show off at dinner!

NOTE: Please have your TerpLink confirmation ready to show when you arrive for check-in!

SEATS ARE LIMITED, register early!

In partnership with Terrapin Works
Hosted by: Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11841046

WIE - Intro to Woodworking: Chopsticks Workshop
2025-11-19 23:30 - 2025-11-20 00:00 | J.M. Patterson building ROOM #1210
Join the Women in Engineering (WIE) Program at UMD, which supports and empowers women pursuing engineering. WIE offers resources, workshops, and opportunities to help students thrive in STEM.

In this guided session, you’ll shape, sand, and finish your own pair of chopsticks while learning simple techniques for smooth, comfortable results. Walk away with a handmade set to show off at dinner!

NOTE: Please have your TerpLink confirmation ready to show when you arrive for check-in!

SEATS ARE LIMITED, register early!

In partnership with Terrapin Works
Hosted by: Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11841047

IES: Intro to Soldering
2025-11-20 22:00 - 23:30 | A. James Clark Hall | Leidos Lab bay #1106
Join Terrapin Works for Intro to Soldering from 5:00 to 6:30 pm!

Join us for hands-on training with electronics and tools! Learn how to solder wires, printed circuit boards, and perfboards in this beginner-friendly workshop.

This workshop is highly recommended for students in ENES courses who want to strengthen their hardware skills and build confidence working with electronics.

Objectives:
Learn soldering techniques for wires, printed circuit boards, and perfboards
Gain hands-on experience using soldering tools safely and effectively
Support ENES students in developing practical hardware skills

ATTENDEES ARE ENCOURAGED TO BRING THEIR OWN LAPTOP, and a mouse is helpful!

SEATS ARE LIMITED, register early!
Hosted by: Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11845174

GBM - Homemade Oat Milk & Cocoa
2025-11-20 22:30 - 2025-11-21 00:30 | 3401 Marie Mount Hall
Come learn how to make your own oat milk, and use it to make a delicious hot chocolate!
Hosted by: Food Science Club
Additional Information can be found at: https://terplink.umd.edu/event/11856141

The Life of Showgirl Craft Night
2025-11-22 01:00 - 03:00 | Margaret Brent 2112 | Adele H. Stamp Student Union
✨ Step into The Life of a Showgirl! ✨Join us for a glam-filled night inspired by Taylor Swift’s new album — paint your own martini glass, decorate dazzling masquerade masks, and enter to win The Life of a Showgirl themed prize, all while listening to the album and discussing it with friends! Hope to see you there!
Hosted by: Meet Me Behind McKeldin Mall, Student Entertainment Events
Additional Information can be found at: https://terplink.umd.edu/event/11893403

Autumnal Leaf Printing Workshop
2025-11-24 20:00 - 21:00 | Community Learning Garden
Bring your own dark blue or black cotton items to in the Community Learning Garden to create a unique leaf print. We will use bleach to print the leaf design onto the items, then participants will be able to take their shirts home. Additionally, participants will have the opportunity to learn more about native trees.
Hosted by: Community Learning Garden
Additional Information can be found at: https://terplink.umd.edu/event/11822980

WIE - Intro to Python
2025-11-24 22:00 - 23:30 | A. James Clark Hall | Leidos Lab bay #1106
Join the Women in Engineering (WIE) Program at UMD, which supports and empowers women pursuing engineering. WIE offers resources, workshops, and opportunities to help students thrive in STEM.

This beginner-friendly session introduces the fundamentals of Python through hands-on exercises. By the end, you’ll understand key coding concepts and create a Rock-Paper-Scissors game to put your skills into practice.

ATTENDEES ARE ENCOURAGED TO BRING THEIR OWN LAPTOP, and a mouse is helpful!

SEATS ARE LIMITED, register early!

In partnership with Terrapin Works
Hosted by: Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11845271

WIE - Intro to Python
2025-11-25 22:00 - 23:30 | A. James Clark Hall | Leidos Lab bay #1106
Join the Women in Engineering (WIE) Program at UMD, which supports and empowers women pursuing engineering. WIE offers resources, workshops, and opportunities to help students thrive in STEM.

This beginner-friendly session introduces the fundamentals of Python through hands-on exercises. By the end, you’ll understand key coding concepts and create a Rock-Paper-Scissors game to put your skills into practice.

ATTENDEES ARE ENCOURAGED TO BRING THEIR OWN LAPTOP, and a mouse is helpful!

SEATS ARE LIMITED, register early!

In partnership with Terrapin Works
Hosted by: Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11845272

WIE - Intro to Soldering Workshop
2025-12-01 22:00 - 23:30 | A. James Clark Hall | Leidos Lab bay #1106
Join the Women in Engineering (WIE) Program at UMD, which supports and empowers women pursuing engineering. WIE offers resources, workshops, and opportunities to help students thrive in STEM.

Learn the fundamentals of soldering while gaining hands-on experience with electronics and tools. You’ll practice cutting wire, working with through-hole components, and making proper connections.

ATTENDEES ARE ENCOURAGED TO BRING THEIR OWN LAPTOP, and a mouse is helpful!

SEATS ARE LIMITED, register early!

In partnership with Terrapin Works
Hosted by: Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11886469

Intro to CAD Using Autodesk Fusion 360
2025-12-02 22:00 - 23:30 | John and Stella Graves Makerspace
Do you want to design your own 3D models? Join us in the John and Stella Graves Makerspace as we collaborate with Terrapin Works to teach you the basics of 3D modeling in Fusion 360! By the end of this workshop, attendees will understand the utility of Fusion 360 and how to navigate the software to use some of the most commonly accessed functions when making a 3D model. Attendees will also learn how to make simple 2D sketches, and how to turn these sketches into 3D models. Together, participants will model a planter in Fusion 360 and take home the model they create!
Space for this workshop is limited, so please be sure to register in advance with your UMD email. Registration is required for this event. As the workshop sessions are timed, please be sure to arrive at the beginning of your registered session to receive all of the workshop content.
Supplies needed: participants must bring a laptop and download Fusion 360 prior to attending. Please view this video for instructions on how to install the free student license for Fusion 360. A mouse is also highly recommended for this workshop.
RSVP for this event on the Libraries Calendar:
October 7, 5-6:30PM
December 2, 5-6:30PM
Hosted by: John and Stella Graves Makerspace, Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11584296

WIE - Intro to Soldering Workshop
2025-12-02 22:00 - 23:30 | A. James Clark Hall | Leidos Lab bay #1106
Join the Women in Engineering (WIE) Program at UMD, which supports and empowers women pursuing engineering. WIE offers resources, workshops, and opportunities to help students thrive in STEM.

Learn the fundamentals of soldering while gaining hands-on experience with electronics and tools. You’ll practice cutting wire, working with through-hole components, and making proper connections.

ATTENDEES ARE ENCOURAGED TO BRING THEIR OWN LAPTOP, and a mouse is helpful!

SEATS ARE LIMITED, register early!

In partnership with Terrapin Works
Hosted by: Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11886470

Singh Sandbox Series - Intro to CAD: Autodesk Fusion360 Workshop
2025-12-03 18:30 - 20:00 | 1231 Brendan Iribe Center for Computer Science & Engineering
Join Sandbox, a UMD makerspace in the Iribe Center, for Intro to CAD on Wednesday, December 3 from 1:30 to 3:00 pm!

Learn the basics of Computer-Aided Design (CAD) through hands-on exercises. You will design your very own succulent planter, then submit it to Terrapin Works to receive a pre-printed version — no wait required!

ATTENDEES ARE ENCOURAGED TO BRING THEIR OWN LAPTOP, and a mouse is helpful!

!! Download the CAD software before the workshop using this guide: https://go.umd.edu/InstallCAD

SEATS ARE LIMITED, register early!

In partnership with Terrapin Works
Hosted by: Singh Sandbox Makerspace, Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11834060

Rocket Launch Competition Workshop
2025-12-03 22:00 - 23:30 | A. James Clark Hall | Leidos Lab bay #1106
Join Terrapin Works for the Rocket Launch Competition from 5:00 to 6:30 pm!

Build it. Launch it. Win it.

In this workshop, you’ll design and assemble your own rocket using 3D-printed bodies and simple materials like cardboard, glue, and scissors. With no step-by-step instructions, you’ll rely on your own creativity and problem-solving skills to make your rocket flight-ready.

Once complete, bring your rocket to the launch station and see how far it soars. The top three rockets will win a prize!!
SEATS ARE LIMITED, register early!
Hosted by: Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11898485

IES: Intro to Filter Design
2025-12-04 22:00 - 23:30 | A. James Clark Hall | Leidos Lab bay #1106
Join Terrapin Works for Intro to Filter Design from 5:00 to 6:30 pm!
Learn the essentials of designing and understanding electronic filters in this beginner-friendly workshop taught in CircuitLab.
You will explore the most common filter types, while learning how to create and customize them in simulation. We will also cover real world drawbacks and limitations to help you build a practical foundation for choosing and designing filters in your own circuits.
ATTENDEES ARE ENCOURAGED TO BRING THEIR OWN LAPTOP, and a mouse is helpful!
SEATS ARE LIMITED, register early!
Hosted by: Terrapin Works
Additional Information can be found at: https://terplink.umd.edu/event/11903214
